homemade snorkel kit
Mar 25, 2008 | 10:31 PM
#2
Pro Rider
Joined: Jun 2005
Posts: 949
Likes: 0
From: Southern NH
homemade snorkel kit
Look at the pictures in my Profile.
Link to my Snorkle
I only snorkled the front' I used plain old 2" PVC and a 2" Rubber coupling/clamp. I tried glueing a PVC piece to the stock part (which you can see in the picture) but realized afterwards that you cannot remove your front Fender! Doh! So the 2" rubber coupling/clamp works pissa... I just "tried it tonight by opening the drain plug an immersing that whole coupler (well as much as I could) spraying water and no leaks[img]i/expressions/face-icon-small-smile.gif[/img] I am thinking that maybe under pressure (when it is constantly under water it MIGHT leak.. but I highly doubt it...
Link to my Snorkle
I only snorkled the front' I used plain old 2" PVC and a 2" Rubber coupling/clamp. I tried glueing a PVC piece to the stock part (which you can see in the picture) but realized afterwards that you cannot remove your front Fender! Doh! So the 2" rubber coupling/clamp works pissa... I just "tried it tonight by opening the drain plug an immersing that whole coupler (well as much as I could) spraying water and no leaks[img]i/expressions/face-icon-small-smile.gif[/img] I am thinking that maybe under pressure (when it is constantly under water it MIGHT leak.. but I highly doubt it...
Thread
Thread Starter
Forum
Replies
Last Post
Customer Service #1
Arctic Cat
73
May 15, 2020 08:46 AM
Steeldon
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
4
Sep 9, 2015 09:38 AM
Cantbuytime
Buying an ATV
8
Aug 17, 2015 06:33 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)