Bayou 300(removing rear driveshaft)

Reply Subscribe

Thread Tools

Search this Thread

Jul 25, 2009 | 07:30 PM

Sports500

Thread Starter

Weekend Warrior

Joined: Dec 2008

Posts: 15

Likes: 0

Bayou 300(removing rear driveshaft)

Hi, i have to replace the housing on the engine side that the boot clamps to, and need a little help on the easiest way to go about removing the driveshaft

I have to replace part #13091 from this image
http://www.bikebandit.com/houseofmot.../m3325sch33312

Last edited by Sports500; Jul 25, 2009 at 08:23 PM. Reason: wrong part# and image

Jul 26, 2009 | 09:34 PM

Tag75

Range Rover

Joined: Dec 2006

Posts: 102

Likes: 0

I no longer have my 300 4x4 but it seems like I had to swing the rear axle back by unhooking some of the rear suspension. This allowed it to pop off its yokes.

Sep 28, 2009 | 10:03 PM

nmhuntr

Trailblazer

Joined: Aug 2008

Posts: 49

Likes: 0

Quote:

Originally Posted by Tag75

I no longer have my 300 4x4 but it seems like I had to swing the rear axle back by unhooking some of the rear suspension. This allowed it to pop off its yokes.

That is correct