Hillshooting video
May 3, 2010 | 10:43 AM
#1
Thread Starter
|
Pro Rider
Has been here a long time!
Has been here a long time!
Joined: Jan 2004
Posts: 1,602
Likes: 1
Hillshooting video
May 3, 2010 | 01:24 PM
#4
Thread Starter
|
Pro Rider
Has been here a long time!
Has been here a long time!
Joined: Jan 2004
Posts: 1,602
Likes: 1
THe first two scenes I am on my Kawi ZX7 conversion DS. I am racing a buddy of mine (Pipelayer) on his lightweight (~350lb) 730 big bore with all the bells and whistles. His DS broke shortly after that race
The last two scenes I am riding my brothers 04 DS which is mostly stock with the exception of an HMF slip-on, BIg Gun CDI and some carb tuning. Pipelayer is riding my conversion
The last two scenes I am riding my brothers 04 DS which is mostly stock with the exception of an HMF slip-on, BIg Gun CDI and some carb tuning. Pipelayer is riding my conversion
May 20, 2010 | 03:38 PM
#7
Thread Starter
|
Pro Rider
Has been here a long time!
Has been here a long time!
Joined: Jan 2004
Posts: 1,602
Likes: 1
The camera is a ContourHD 1080p model HD Helmet Cam - ContourHD and ContourHD 1080p by VholdR
Brian's 730 is OK now. He shut his DS off at the bottom of the hill and it threw up about 2qts of oil out the crankcase hose. It was really strange and he still doesn't know why to this day it happened. He even pulled the motor and took it over to a local builder to take a look at and he found nothing wrong with it.
Brian's 730 is OK now. He shut his DS off at the bottom of the hill and it threw up about 2qts of oil out the crankcase hose. It was really strange and he still doesn't know why to this day it happened. He even pulled the motor and took it over to a local builder to take a look at and he found nothing wrong with it.
Trending Topics
May 23, 2010 | 12:53 AM
#8
Pro Rider
It's official, I've been duning for over 30 years.
It's official, I've been duning for over 30 years.
Joined: Jan 2001
Posts: 1,063
Likes: 0
Thanks for the link. Does that camera have a video output so it could pull double duty as a back-up cam for my Toyhauler?
I wonder if the oil was a siphon effect from having the hose looped up and back down, it's how I route mine and never considered it before. I believe the engine also has a couple check valves (that I confess to not fully understand) that maintain a set crankshaft oil level.
Do you know if the oil tank or crank case became low?
I wonder if the oil was a siphon effect from having the hose looped up and back down, it's how I route mine and never considered it before. I believe the engine also has a couple check valves (that I confess to not fully understand) that maintain a set crankshaft oil level.
Do you know if the oil tank or crank case became low?
