Need help!!!!!!
May 15, 2014 | 01:26 PM
#1
Thread Starter
|
Weekend Warrior
Joined: May 2014
Posts: 4
Likes: 0
From: AZ
Need help!!!!!!
Trying to replace head gasket on 2004 polaris 700 efi twin and don't have manual or $ for one! Are there any videos to show or any free downloadable repair manuals out there?
Last edited by Broken700efitwin; May 15, 2014 at 01:46 PM. Reason: Would like to add free downloadable repair manual as well
May 15, 2014 | 02:09 PM
#2
Polaris ATV Expert
Retired and loving it!
Retired and loving it!
Joined: Jun 2008
Posts: 24,350
Likes: 44
From: North Texas
May 16, 2014 | 09:24 AM
#3
Thread Starter
|
Weekend Warrior
Joined: May 2014
Posts: 4
Likes: 0
From: AZ
Thanks
I can not open this file any other recommendations
This should help you out..http://gh-ftp.com/ORV%20Manuals/Pola...V%20-%20SM.pdf
May 16, 2014 | 01:12 PM
#4
Polaris ATV Expert
Retired and loving it!
Retired and loving it!
Joined: Jun 2008
Posts: 24,350
Likes: 44
From: North Texas
One other pdf manual is 5 bucks.2004 Polaris Sportsman 700 EFI Service Manual PDF Download
If you just need head bolt torque: 35 foot pounds to seat the gaskets. Back off 5 turns,re-torque to 35 foot pounds. Then turn a final 90 degrees (1/4 turn) on each head bolt. Rocker arm bolts torque to 22 foot pounds.
If you just need head bolt torque: 35 foot pounds to seat the gaskets. Back off 5 turns,re-torque to 35 foot pounds. Then turn a final 90 degrees (1/4 turn) on each head bolt. Rocker arm bolts torque to 22 foot pounds.