I finally got a few pictures taken this evening with the new shocks installed. Also removed the e-brake and installed a new set of bar's and clutch lever. I just threw them up on my geocities account here is the address http://www.geocities.com/zrwhat.geo/Raptor/. If you are interested in mustangs check out the mustang directory http://www.geocities.com/zrwhat.geo/My_Stangs/. Here are my questions.

1. The new shocks didn't seem to lower the quad too much if any. They are Elka triple rates w/SSD that should drop the front ~1in. I do have the rear linkage flipped and that considerable dropped the rear, so now I feel like I am riding a "Chopper", any suggestions?

2. Installed the new clutch lever, but there is no room for the starter/choke/lights switch when the clutch lever is pulled. If you look in my pictures you will see that I had to move this switch farther toward the middle of the machine. The problem is that its a pretty long reach with the old thumb to get to the starter button. I suppose that I could rewire a new starter button closer to the clutch perch, any suggestions?