I have added a 12 tooth front and 44 tooth rear sprocket. My bike is still too high geared for the technical low speed mountain riding I do. I rarely get into 3rd.

Anyone running an 11tooth front sprocket? Did it slow this dragster down enough?

Who makes an 11tooth?

Mark

 

Check with RockyMountainATV.com

It will cost you about $7.00 plus shipping.

 

Hmm..they don't list smaller than 12 tooth for any brand for the Raptor. Any other ideas?

Mark

 

The only other option that I can see is going with a:

46 Tooth Rear Sprocket, PD, Yamaha Raptor 01, 46 Tooth N/A $14.99

Either that or consider going to a smaller outside diamemter tire. But then you will be sacrificing ground clearance.

 

I was sent a 10 by accident for my warrior, never used it.. Pretty sure they are the same, If you want it I take paypal [img]i/expressions/face-icon-small-smile.gif[/img]

but with 11 or 10, you are going to wear into your swingarm in no time, probably one or 2 rides, let alone the chain and sprocket aint gonna last

 

10 may be too low. I'm going to continue looking for an 11 tooth.

Thanks anyways,

Mark

 

Do you have any photos of your bike mjos. I would like to see it with the Swirl Graphics and all your mods.

 

Call Sidewinder (www.sidewinder.com). They can make it.

/Jon

 

I have an 11 tooth front it is from Sprocket Specialists part # 504-11. Havnt put it on yet though since i will need to get a smaller chain.

 

I have an 11 tooh (same one renn posted from Sprocket Specialists), I use it for the same type of riding that you mentioned along with a 42 rear and it works great.