I'm setting up my 45 for my engine and would like to get some ideas on what I should start out at on jetting?
you can see what I have for a engine below.

What I thinking of start out with is...

sea level

main 150
needle 3rd clip stock
Pilot either 34 or 32.5
Pump active with 50
idle mix screw?

I'm main worry about the pilot and the idle mix screw as for the main jet I can get that easy enough as for the pump it just takes fiddling.

these are the jets I have
main
155,152.5,150,147.5,145,142.5
pilot
37.5,35,stocksize,32.5,30

Any ideas would be great thanks

 

This page might help out http://home.swbell.net/tharthun/home/dsdata.htm

 

It gives me some info. But not enough on pilot jets etc. but thanks

 

Is everyone out riding but me?

 

[img]i/expressions/face-icon-small-smile.gif[/img]

 

[img]i/expressions/face-icon-small-mad.gif[/img]

 

[img]i/expressions/face-icon-small-smile.gif[/img]
Well, I have the HSR42..
Acl pump 50
Pilot 32
MJ 145
needle 3rd clip

 

thanks dude!