fires fine on the right. kinda hit and miss on the left. also what kinda plugs do u all run and what gap? what mix also.

 

check the spark plug caps. use a ohm meter to test the resistance. the spec is in the service manual. i think i run br8es plug, dont remember the gap though. sorry for all the vague info, im at school and have no access to all my info at home.

 

been swappin from br8es to b8es. not a newbie.........just kinda stumped. cant have the shee and raptor down at the same time

 

run B8EG and B8ES or anything better. Run the gap at about 25-30.

 

or maybe one of the carbs sucked in part of your air-filter. right nick?

 

i am thinking it is something to do w/ the carb. I will probably find out tonite when i break it down. what is the diff between b8eg and es?

 

The EG has a smaller uh..little deal. lol, its smaller, and costs more, so i guess its better. lol

 

the two letter designation at the end designates the material used in the firing tip

gold
silver
iridium
etc....

 

well i learned something new and it makes sense. guess i am full of questions...............which will fire "easiest" or hottest? or the most consistent. i guess i want the one that last the longest.............think my wife has said that sometime too?

 

well the number is temp. 7 is hottest, 8 is in the middle, and 9 is coldest if i remember right. the more money you spend, the easier it will fire, and harder it will be to foul it out.