what would you have to do to a 2003 Blaster to be able to do 62mph plus?

While still trail rideable.

please post est costs of mods needed.

 

Thats easy, Just put it in the back of a truck and you are done.[img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-wink.gif[/img]

 

Sell it and Buy a Raptor, J/K

Turbo-2k-4k

Big Bore Kit- 1,800-3,000

Exhast-500, K & N-35, JE Pistons and Hot Cam Stage I or II-350, Sprockets-10 to 20 $... Those R just a few mods that I can think of!!

NuG

 

i would think that a piped ported with some goodies geared up and with atleast a 20 maby 22 inch tire would go in the 60 to 65mph range. dw claimed that just the toomey pipe made it go 65mph but we got a gun on mine and it was more like 55 - 18inch tires (ice racing) with 14/38 gearing (stock is 13/40)

 

When I had my 94 Blaster it would out run a Stock Warrior.
It had FMF Fatty Pipe and a Power Core 2 Silencer and a K&N Air Filter and Boyesen reeds and a reed spacer and it was ported and bored 20 over and it had a set of 21x7x10 Front holeshot tires and it also had 20x11x9 holeshot rear tires.

 

since it would be the guys first sport quad. B1 pipe kit and 1 tooth up on front sprocket. that would have him around what he wants to be able to do.

I dunno what is with people and there top speeds. how can the same modle of machine vary from 45mph top speed to 64mph top speed stock.

thanks for the info.

 

well according to most people stock speed is around 50 to 55mph stock not 45.
i was ice racing so this wasn't on dirt and has 18inch tires.
Yup thats a pretty common setup b1 with a 14t. i'v heard different stories but with that you looking at somewhere in between 55 to 60mph.

 

I would like to put the motor in my signature in a blaster but i can never find one

 

pipe it and go up a tooth on the front and drop one on the rear.......you should come close then

 

change the gearing....pipe and jet, reeds u should have no problem doin that