Arctic Cat Discussions about Arctic Cat ATVs.

cranks but wont stay running

Thread Tools
 
Search this Thread
 
  #1  
Old 12-30-2007, 04:35 PM
sleeper1969's Avatar
Weekend Warrior
Thread Starter
Join Date: Sep 2007
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default cranks but wont stay running

ive got an 2004 arctic cat that has developed a problem. it will crank but just as soon as it gets started it will go dead.ive checked the carb and it is ok nice and clean.when i give it gas it goes dead. tried new battery but same results. new gas also, no go. any ideas??
 
  #2  
Old 12-30-2007, 11:47 PM
mudslinginfool's Avatar
Pro Rider
Does it in the Mud!
Join Date: Jul 2005
Location: arnold,mo
Posts: 1,266
Likes: 0
Received 0 Likes on 0 Posts
Default cranks but wont stay running

check the spark plug and make sure the gap is correct. air box clean of debre? couple easy things to try.
 
  #3  
Old 01-07-2008, 06:31 PM
sleeper1969's Avatar
Weekend Warrior
Thread Starter
Join Date: Sep 2007
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default cranks but wont stay running

ok,air box seems clean and i am going to replace sparkplug just to be safe.(it was black around end).i noticed though that when i took the plug off that the top of the plug has a treaded top instead of a regular cap like in a car... is that normal?
 
  #4  
Old 01-14-2008, 01:01 PM
25083's Avatar
Trailblazer
Join Date: Apr 2005
Posts: 49
Likes: 0
Received 0 Likes on 0 Posts
Default cranks but wont stay running

Usually if your plug is black, you are running too rich. My V2 does the same thing and I'm trying to get it start and run properly. That is normal for the threaded plug connector, a lot of bikes are like that.
 
  #5  
Old 01-14-2008, 08:26 PM
mudslinginfool's Avatar
Pro Rider
Does it in the Mud!
Join Date: Jul 2005
Location: arnold,mo
Posts: 1,266
Likes: 0
Received 0 Likes on 0 Posts
Default cranks but wont stay running

well, whats the verdict? is it fixed?
 
  #6  
Old 01-14-2008, 10:42 PM
sleeper1969's Avatar
Weekend Warrior
Thread Starter
Join Date: Sep 2007
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default cranks but wont stay running

its cranking with the pull crank better now but when i try to use the push button it just clicks.im going to try a newer battery and check out the starter to make sure its engaging correctly.on the running to rich part? how do i correct that?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hankey Pankey
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
26
10-18-2020 03:50 PM
TegraQuad
1) Engine problems..
13
11-26-2017 01:40 PM
tiresharkdbb
Honda
11
09-03-2017 02:06 AM
cbcole02
Kids Quads & Other ATV's - Ask an Expert!
5
09-07-2015 06:16 AM
jayking232003
Yamaha
2
06-09-2015 02:54 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: cranks but wont stay running



All times are GMT -5. The time now is 11:28 AM.