Need help please!
 

So I'm having problems with my 97 BearCat 454cc. 1st problem: What's the correct compression range for this atv? 2nd problem: Every time I start this quad the 30amp fuse in the (starter relay?) towards the back of the quad wants to blow. Any ideas why?

Not sure about the compression I'll have to check on that.

30amp fuse popping is a result of a short. When I had a similar issue with my TRV. Mine would pop when I turned the key to the ON position. I took the instrument pod a part and found a wire going to the ignition key that had been pinched when it was built. Once I traced it down and patched it up no more problems. So if it were mine, I would follow the wires from the 30amp fuse to the ignition and where ever else it goes looking for a short.

SJ