05 Arctic Cat 400 4x4 LCD display not working
 

My LCD display for my instrument pannel for some reason is not working at all. I have no idea what the problem might be, I checked around to see if there was a blown fuse maybe, but I had no luck finding a fuse box, or where the fuse might be. I do not have an owners manual at the moment I am going to order one soon, but does anyone have any ideas why the display is not working?

This works on the '06 + up models.....

Your fuse(s) are under the seat by the battery (I think). IF you find it - pull the 30amp accessory fuse. THEN remove the battery cables. Wait 5 min. Re-connect the battery and put the fuse back in.

You need to "wipe" the ECM memory to re-set the pod display. This method seems to solve most blank pod problems. If not - check your wiring harness up under the pod to ensure it plugged in to the gauge, and while your at it check ALL your wires running up the front of the handlebars/steering post for any wire chafe'n.

Hope this helps....good luck.

Service manual
 

You can download a free 2005 AC service manual which covers your 400 at the following link.

K&T Parts House Lawn Mower Parts and Chain Saw & Trimmer Parts

The fuse box is down by the rear tire it is the right rear i think if you look at the inside of the fender you will see the fuse cover, two twist screws hold the cover on.

The quad is in the shop right now getting the 4 wheel drive fixed. When I get it back this week I will check it out. Thanks for all the help guys!