Can anyone tell me if there are 2 spacers, one for each end of the axle? Hubby said when he puts it in and tightens everything, the wheels won't turn freely like they should. Or if you have any other ideas, they'd be appreciated! Thanks [img]i/expressions/face-icon-small-smile.gif[/img]

 

you might go to an atv parts web site and look for oem parts for your bike.Alot of times these sites will have a picture of the parts that you can order thus letting you know if there are two spacers.you might check bikebandits.com

 

I did that first...the only pic with the axle in it does not show anything that goes on the axle. I double checked before replying and even looked at the pic with the rear wheel to see if maybe it showed anything there. Can't find anything...if it does have 2 on each side, he's probably lost the stupid thing!

 

I went to bikebandits and clicked on final driven gear rear axle.The only spacers I seen was the ones that go on each side of the ring gear.I noticed there were different thicknesses it looked like of these spacers.I really didnt understand that.He's not trying to put his spacer on the end of the axle instead of on the ring gear is he?

 

I found some axle nut spacers for sell on eBay...so I'm assuming there are 2 of them, one is a tad bit bigger than the other one. But he's only got 1, so he's lost the other one! I can't find any new ones for sale online either. I'm still trying to find any info I can...thanks!