I bent my upper ball joint on my Laegar A-arms. Does anyone know the part #? I would like to get them from an auto parts dealer locally.

 

take the ball joint to the automotive store thell match it up for you

 

I know Lonestar uses a tie-rod end off of a Ford Courier(sp). Maybe Leager uses the same one.

 

I think Laeger uses VW bug tie rod end.

 

After further investigation and the kind help of my local front end parts dealer. (about two hours) I was able to get a MOOG part # for Laegar's A-arm ball joints. It is MOOG ES 419R. Try to get one with a grease zerk as there are many designs with this same part #. It cost $18.00 instead of the outrageous price quoted by a Laegars dealer. If you own a set of 400ex Lone Star A-arms, they use a MOOG ES 2074R. Again look for the grease fitting. It will prolong the life of the joint.

 

Is that the same parts number for all 4 ball joints: left, right, upper, lower?

 

not sure about the laeger arms but on the lonestar all four ball joints are the same

 

Yes. All four ball joints are the same. The laegar's lower joint mounting hole can be drilled and tapped to accept the larger and stronger MOOG ES 2074R. This was done to mine by Tom Miller Motorsports in Tenn.

 

I have the LoneStar A-Arms for the Raptor and they use the same ball joint part # as the 400ex.