|
End Cap doesn't fit
I just got the EBAY end cap and put it on. But the holes don't line up. The stock pipe threaded holes are too far down on the pipe to line up.
Anyone else run into this problem? Suggestions? Thanks, |
End Cap doesn't fit
Whose endcap is it? i mean a HPR, Ondunes, etc. I personally haven't run the endcap, but I'm sure it should fit, maybe it's just positioned wrong...i dunno.
|
End Cap doesn't fit
Originally posted by: TheChosenOne Whose endcap is it? i mean a HPR, Ondunes, etc. I personally haven't run the endcap, but I'm sure it should fit, maybe it's just positioned wrong...i dunno. I think I might have to cut a 1/2 inch on the stock pipe |
End Cap doesn't fit
I know this is an insulting question....... Take it the right way.
Did you rotate it and try every possible angle that the screws might line up? Sorry.....[img]i/expressions/face-icon-small-blush.gif[/img] |
End Cap doesn't fit
He said the holes were too low down the tube to not line up, not offset where rotation would eventually match them.
Does it have a slot or groove cut into the inside that is not fitting over the lip? The feedback seems to indicate that it has worked for others. Call them and see what they tell you. We'd be interested. After seeing what the "proven" ones cost I didn't pick one up off of eBay yet for exactly this reason. keep us updated. |
End Cap doesn't fit
AZ,
In your original thread I replied that you might have to trim the baffle on the exit end to allow the end cap to go down far enough to line up the holes. [img]i/expressions/face-icon-small-wink.gif[/img] Ben |
End Cap doesn't fit
If you cant get the cap on far enough to line up the holes, then thats an end cap manufacturing problem. If the holes dont line up from side to side, then that can be due to imperfections in the manufacuturing of the stock can. Thats why I slotted my holes so they would line up.
In my opinion, this is why you should spend a little more money on a good end cap. That way they dont have a problem making it right by returning it or repairing it. Another reason why Im not hip on Ebay. |
End Cap doesn't fit
Originally posted by: OregonDunePatrol If you cant get the cap on far enough to line up the holes, then thats an end cap manufacturing problem. If the holes dont line up from side to side, then that can be due to imperfections in the manufacuturing of the stock can. Thats why I slotted my holes so they would line up. In my opinion, this is why you should spend a little more money on a good end cap. That way they dont have a problem making it right by returning it or repairing it. Another reason why Im not hip on Ebay. But your end cap can't be had yet. lol. =] By the way, any date yet on ODP??? |
End Cap doesn't fit
I would contact the company and try for a replacementm, figuring that they may have just issued you one for the wrong quad. Never hurt to give it a try.
|
End Cap doesn't fit
did you cut the screen?? it should fit then?? got the same one and have no problems with it,,just had to cut the screen!![img]i/expressions/face-icon-small-smile.gif[/img]
|
| All times are GMT -5. The time now is 02:39 AM. |
© 2026 MH Sub I, LLC dba Internet Brands