520 CHAIN KIT
#34
#35
520 CHAIN KIT
BigDaddy said,
"DuneMe, I'll be runnning them soon. I went to the 520 conversion thanks to BigBaja. I using the Sidewinder TI-Moly rear and front. I got my chain from a place called Moto-chain. You can find them on the web. We were able to go right down the book and look at Tensil strengh, O-ring vs. X-ring. For those of us who have extended swing arms, MotoChain was able to set me up with a 9000lb tensil strength Xring in 126 links. Cut specific for me and too my door in about 4 days. Cost me under 90. I should be set and ready to go. I've heard that the TI moly is the way to go, but obviously cost is pretty bad if you are paying retail - Again, thanks Baja."
I don't know what you put in, but when I put in Moto-Chain in Google, it comes up with lube joints, moto guzzi, and nothing related to chains except lube joints.
Thanks
"DuneMe, I'll be runnning them soon. I went to the 520 conversion thanks to BigBaja. I using the Sidewinder TI-Moly rear and front. I got my chain from a place called Moto-chain. You can find them on the web. We were able to go right down the book and look at Tensil strengh, O-ring vs. X-ring. For those of us who have extended swing arms, MotoChain was able to set me up with a 9000lb tensil strength Xring in 126 links. Cut specific for me and too my door in about 4 days. Cost me under 90. I should be set and ready to go. I've heard that the TI moly is the way to go, but obviously cost is pretty bad if you are paying retail - Again, thanks Baja."
I don't know what you put in, but when I put in Moto-Chain in Google, it comes up with lube joints, moto guzzi, and nothing related to chains except lube joints.
Thanks
#37
520 CHAIN KIT
www.moto-chains.com
Real good guys. If the answer machine comes on, they're out in the shop. Leave a message and they'll call you right back. They really spend the time with you.
They also have a master link for the EK chains that does't require the special tool, but installs like a pressed link. Obviously the worst link is a clip link, but the new stuff is very cool. Works GREAT.
Real good guys. If the answer machine comes on, they're out in the shop. Leave a message and they'll call you right back. They really spend the time with you.
They also have a master link for the EK chains that does't require the special tool, but installs like a pressed link. Obviously the worst link is a clip link, but the new stuff is very cool. Works GREAT.
Thread
Thread Starter
Forum
Replies
Last Post
mrtidy
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
02-03-2016 05:00 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)