100 Db Drag Pipe
#21
100 Db Drag Pipe
Originally posted by: duneittilludie
Ron i am also trying to think of ways to get more power with reasonable sound levels and i have one idea that may work for me and my disced end cap.I was considering having a large 1"or so hole drilled in the solid end of my end cap and then having that threaded so that i can remove a threaded plug when i get to the drag hill.As you have seen my disced end cap gives me good results and great torque and if i could gain more flow and top end by removing such a plug i could possibly have a fairly quiet pipe that is somewhat adjustable for the hill.My stock pipe with the end cap usually does not even get a second look since it seems to be stock to most eyes so i may see if this will work.I will probably give this a try soon since i could always plug the hole up for good if this does not work.
Ron i am also trying to think of ways to get more power with reasonable sound levels and i have one idea that may work for me and my disced end cap.I was considering having a large 1"or so hole drilled in the solid end of my end cap and then having that threaded so that i can remove a threaded plug when i get to the drag hill.As you have seen my disced end cap gives me good results and great torque and if i could gain more flow and top end by removing such a plug i could possibly have a fairly quiet pipe that is somewhat adjustable for the hill.My stock pipe with the end cap usually does not even get a second look since it seems to be stock to most eyes so i may see if this will work.I will probably give this a try soon since i could always plug the hole up for good if this does not work.
A simple threaded hole might work - especially for sniffer testing. But, I would ask that you consider simply adding disks if you are strickly wanting more top end or horsepower. The reason I favor the disks over a simple hole is the scavenging affect of the disks themselves. They assist in drawing out hot exhuast gases and therefore may - I REPEAT MAY - actually assist in getting more power. Its something to consider anyways. From all the research I did a few years ago, thats what is popping in my mind about those disks.
Marky
#22
100 Db Drag Pipe
Mark i agree that more discs is the best idea but adding discs out on the sand is difficult when conditions are dry and windy and by that i mean i have done that and dropped some of the screws and had a hard time finding them.I may find that a simple 1" hole does nothing or is worse than without but it should be cheap and easy to try.I should add that you did a great job on this end cap when you came up with it and the design works very well as is.The torque that i get when using 12 discs is great and really helps get my big behind out of the hole quick in a drag race.The sniffer testing could be done through this hole so even if that is all that it accomplishes it would be worth it for me.
#23
100 Db Drag Pipe
Originally posted by: duneittilludie
Mark i agree that more discs is the best idea but adding discs out on the sand is difficult when conditions are dry and windy and by that i mean i have done that and dropped some of the screws and had a hard time finding them.I may find that a simple 1" hole does nothing or is worse than without but it should be cheap and easy to try.I should add that you did a great job on this end cap when you came up with it and the design works very well as is.The torque that i get when using 12 discs is great and really helps get my big behind out of the hole quick in a drag race.The sniffer testing could be done through this hole so even if that is all that it accomplishes it would be worth it for me.
Mark i agree that more discs is the best idea but adding discs out on the sand is difficult when conditions are dry and windy and by that i mean i have done that and dropped some of the screws and had a hard time finding them.I may find that a simple 1" hole does nothing or is worse than without but it should be cheap and easy to try.I should add that you did a great job on this end cap when you came up with it and the design works very well as is.The torque that i get when using 12 discs is great and really helps get my big behind out of the hole quick in a drag race.The sniffer testing could be done through this hole so even if that is all that it accomplishes it would be worth it for me.
#24
#25
Administrator¿
Resident Killer!
"A little nonsense now and then, is relished by the wisest men". Willy Wonka: 1971
Cigars! Earth ne'eer did breed such a jovial weed.
A Tiger Doesn't Lose Sleep Over Opinions of Sheep
Resident Killer!
"A little nonsense now and then, is relished by the wisest men". Willy Wonka: 1971
Cigars! Earth ne'eer did breed such a jovial weed.
A Tiger Doesn't Lose Sleep Over Opinions of Sheep
Join Date: Jan 2006
Location: Landrum, South Carolina, elevation 986'
Posts: 54,721
Received 5 Likes
on
5 Posts
100 Db Drag Pipe
Originally posted by: DSNUT
That is because you don't live in an area with sound restrictions. I am forced as it is to swap back and forth between the drag pipe for racing and the stock header with my Top Gun slip on. What I am trying to accomplish is to be able switch back and forth in about 2 min so i never have to touch the header bolts. I will use the drag tip in competition and the Top Gun tip when running the race hills on the Oregon coast.
What I am really looking for is feedback from people who ride where there is sound restriction and if they would have any interest in this idea.
If not, I will only make mine[img]i/expressions/face-icon-small-smile.gif[/img]
That is because you don't live in an area with sound restrictions. I am forced as it is to swap back and forth between the drag pipe for racing and the stock header with my Top Gun slip on. What I am trying to accomplish is to be able switch back and forth in about 2 min so i never have to touch the header bolts. I will use the drag tip in competition and the Top Gun tip when running the race hills on the Oregon coast.
What I am really looking for is feedback from people who ride where there is sound restriction and if they would have any interest in this idea.
If not, I will only make mine[img]i/expressions/face-icon-small-smile.gif[/img]
Thread
Thread Starter
Forum
Replies
Last Post
mrtidy
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
02-03-2016 05:00 PM
greg86hd
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
09-16-2015 12:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)