Rad hose Tee for Temp gauge sender?
#1
Rad hose Tee for Temp gauge sender?
I finally found one on eBay for $25 it's made from billet aluminum and fits the Ds650's 3/4" or 19mm radiator hose.
Let me know what you think?
or If you know of something better?
Do an eBay search for " Radiator Hose Tee Fitting for ATV temperature gauge "
Item # 330095017127
Thanks.
Let me know what you think?
or If you know of something better?
Do an eBay search for " Radiator Hose Tee Fitting for ATV temperature gauge "
Item # 330095017127
Thanks.
#2
#3
#6
Rad hose Tee for Temp gauge sender?
How do the tracks work - Can you cruise threw fairly deep snow as well ? Did you make the skies yourself ? Where did you get the track kit and how much did it cost ?
Sorry for all the questions, but i was thinking of doing the same next year. There is why to much snow here in the winter to even get my bike out of the shed !!!
Sorry for all the questions, but i was thinking of doing the same next year. There is why to much snow here in the winter to even get my bike out of the shed !!!
#7
Rad hose Tee for Temp gauge sender?
Here is the link to where I purchased my Ski and track setup.
www.atvtrack.com/en/faqT.html
I'm just headed ice fishing so I will check in later.
www.atvtrack.com/en/faqT.html
I'm just headed ice fishing so I will check in later.
Trending Topics
#8
Rad hose Tee for Temp gauge sender?
Hi MRDS650
Sorry I took so long to get back to you I've been out of town.
The Track kit is very easy to install you just use the existing tire lug nuts and one cotter pin per track or ski.
It takes about as long as changing your tire 15 to 20 min max.
I think the kit cost about $2500. Canadian shipped. (A sled may be cheaper)
It will go through three feet of snow no problem, but when you get into four feet or more you will get stuck,
but only if you stop. So keep it pinned in the deep stuff.
The Track height is the equivalent to a 26" tire so it takes its toll on your top speed.
It will knock you back 20 mph, so 50mph tops.
I changed my front sprocket to a 14 tooth and it made a big difference.
Sorry I took so long to get back to you I've been out of town.
The Track kit is very easy to install you just use the existing tire lug nuts and one cotter pin per track or ski.
It takes about as long as changing your tire 15 to 20 min max.
I think the kit cost about $2500. Canadian shipped. (A sled may be cheaper)
It will go through three feet of snow no problem, but when you get into four feet or more you will get stuck,
but only if you stop. So keep it pinned in the deep stuff.
The Track height is the equivalent to a 26" tire so it takes its toll on your top speed.
It will knock you back 20 mph, so 50mph tops.
I changed my front sprocket to a 14 tooth and it made a big difference.
#10
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)