need a little help with electrical,,,,
 

like the title says, need some help
which cdi is compatible with this stator?
one cdi has 4 pins, the other has 5 pins

does the second pic look familiar?

thanks for any help

Jimmy

Well the complete bodged up mess of a wiring loom is all too familiar with Chinese/Taiwanese bikes. The stator doesn't look to have a separate exciter coil, which probably means DC ignition. This is the same as a 1980s car and would use the 4 pin CDI. The high tension ignition coil on a DC system is usually wired with a live from ignition switch, and a pulse wire from CDI. On AC systems the ignition coil has a pulse wire from CDI but other thin wire on it is earth.

tks for that information,,,

Jimmy

bump was hoping for more in depth info,,,,
kinda new with these china machines

Tks in advance for any help

Jimmy