Holeshot HD's
 

k this might sound stupid but where on the tire do it said how much air goes in, i know its on the side but all i can find is the pressure not to go over when setting the bead, someone help?!?!

Holeshot HD's
 

They never give a recommended pressure. I usually run around 4 pounds in back, and 4.5. You will need to experimant a little though, to see what exact pressure if best for your terrain and riding style.

Holeshot HD's
 

Yea, i also run 4-5 pounds. Just like reconranger said, you'll have to experiment a little bit.

Holeshot HD's
 

I ussually run around 4 psi in the rear and 5 psi in the front. I get alot better tractiong running that low of pressure. i dont believe it says on the tire what to go to. I think it says on the bike itself

Holeshot HD's
 

I know on my brothers honda 350 4x4 when setting the bead do not exceed 15psi. I myself would use around the same. As for tire pressure I would run around 4psi back and 5psi front. Guys above need to learn how to answer the mans full question. [img]i/expressions/face-icon-small-tongue.gif[/img]

Holeshot HD's
 

In my holeshot hd's I run about 1.75 in the rear and 2.5 to 3 in the front.

Holeshot HD's
 

4psi is perfect for the HD's...at least thats what i heard..but test everything out alittle and see what psi you like best...

Holeshot HD's
 

i used around 15 to set

for the riding i do i run 4 psi in the front and 3 in the rear

if i get somewhere smoother and flatter i will bump it up a psi or 2 front and rear and i always run more in the front then the rear

Holeshot HD's
 

i just got my razr 2's and they were mounted on douglas red lables and balenced too when i got them and they had 3psi in the rear...so i left that and in the front im running 5psi...i would guess its good if they balenced them for me???