Arctic Cat 400 4x4 Output shaft
#1
02-07-2017, 10:46 AM
Join Date: Sep 2003
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
Arctic Cat 400 4x4 Output shaft
The four wheel drive on my '07 Arctic Cat 400 stopped working. I noticed the boot is torn on the output shaft that leaves the front universal and enters the pinion housing allowing the output shaft to slip backwards out of the pinion housing. Can't figure out what holds the shaft in place unless the boot itself does this job. Any advice? Thanks
#2
02-07-2017, 02:30 PM
Pro Rider
Join Date: Jan 2016
Location: Penobscot, Maine
Posts: 1,178
Likes: 0
Received 0 Likes
on
0 Posts
Looks to me that there are 2 rubber bumpers, 1 on each end, then a spring on the front end that holds it in place. Download a parts manual from <mymowerparts.com> you can see how it all goes together. See if the bumpers are there and the spring. PN 0673-618 bumpers and PN 1402-618 for the spring.
#4
02-07-2017, 04:38 PM
Join Date: Sep 2003
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
2007 Arctic Cat 400 AUTOMATIC TRANSMISSION 4X4 FIS CAT GREEN (A2007ICH4BUSZ) FRONT DRIVE GEARCASE ASSEMBLY | CyclePartsNation Arctic Cat Parts Nation
I'm looking at a parts diagram now...don't see the spring or bumpers. We may be talking about different shafts.
I'm looking at a parts diagram now...don't see the spring or bumpers. We may be talking about different shafts.