Snowmobile to ATV
#11
add me as a friend on facebook matt, email is my user namer at hotmail.com, I have all the pictures up on there, so you can do the right click save picture thing.
As far as a rad and fan, depends if what you have for a sled has one already, if so use them, same with which ever quad you get, just use whatever they come with. size wise if you have hunt one down, a 12x12 or so about a half inch thick minimum would suffice, but if you can go bigger, fitthe biggest one you can (small 4 cyclinder cars would a good source at the local picknpull)and for a fan something with a 6inch diameter or so would be plenty, I'd put some sor of shroud on it as well.
hope this helps
As far as a rad and fan, depends if what you have for a sled has one already, if so use them, same with which ever quad you get, just use whatever they come with. size wise if you have hunt one down, a 12x12 or so about a half inch thick minimum would suffice, but if you can go bigger, fitthe biggest one you can (small 4 cyclinder cars would a good source at the local picknpull)and for a fan something with a 6inch diameter or so would be plenty, I'd put some sor of shroud on it as well.
hope this helps
Thread
Thread Starter
Forum
Replies
Last Post
trx430ex
Land, Trail and Environmental Issues
2
10-12-2000 03:17 PM
atv, build, chassis, convert, converting, crossed, make, motor, qaud, quad, sled, snowmachine, snowmobile, snowmoblie, turn
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)