I want to make me a custome snorkle for my foreman. But how many air intakes does this bike have. i know there is one main 2" intake. and one small line on the carb that has to be routed to the snorkle but are there any other places on the bike that needs air to run? so i can take it to the limits!!!!!!!!!!!!!!!!!!!!!!

 

Hey...what's up man...
Just went through this whole ordeal with my bike...believe me, if you want it done right you need to take it in to your local 4 wheeler guy and here's the deal...there is a total of seven..yes seven,,some people say one, some say three,,,but I've tried it all ways and there is seven that needs to be vented right up with your snorkel...now you can use a tri way connection or whatever to limit the number of hoses coming out but that's the ticket...also your carb will need to be adjusted for you to get full performance out of your bike once this is done...hope this helps...ps we ride down in
Deville sometimes or Kisatchie...maybe we could cruise sometime and you can test her out...
tomkat

 

i am fully trust the local dealer, plus i like coustomizing my bike. i think i am going to have to do it myself.. i would like to check your bike out and find each vent. we rode this weekend at kevin wendoms Flying W what a mud and water fest.. but i cant do what i want to unless my bike can go underwater.........i might rip it all apart and find them all. but if you have any sugestions let me know.

 

i dont know about 7 holes that need to be snorkled, but i know you have to snorkle the air box and seal it tight and the exhaust and belt drive, you can do all of this with pool hose, and stuff like that like clamps.