Honda 250R Aftermarket Frames
#13
#14
#15
I am using an ARENS chassis, steering stem and swingarm. That is all he makes for the 250R right now. I have to say that I am extremely happy with all of it. I cannot believe how well everything fits! No grinding or pounding, it just slides right on. It is nice when you are working with all brand new parts though. As far as other brands here goes:
ROLL-complete frame, a-arms w/tie rods, steering stem, swingarm, linkage, AXIS shocks and mounting hardware for $7495
LAEGER-complete frame, a-arms w/tie rods and tie rod ends, steering stem, spindles, and swingarm for about $5000
LONESTAR-complete frame, a-arms w/tie rods, steering stem, swingarm, hubs, axle, carrier, locknut about $6000
ARENS-frame, steering stem and swingarm for about $2350-$2400
The only one that comes with hardware is the ROLL, otherwise you must use stock hardware for all other stuff. The ROLL chassis must use 400ex spindles and calipers in front. The ARENS swingarm does come with all the pivot hardware though, so all you need is the long bolt to mount it. Laeger's Pro Trax front ends come with mounting bolts and tie rod ends(actually heim joints). The Laeger's Pro Trax has custom spindles but you can use stock 88 or 89 hubs. The Laeger Pro Trax CR500 swingarm needs a CR500 linkage from a dirtbike and that is about $500 brand new. You can get Laeger frames for stock linkage as well. All of these have removable subframes and all are very well made. I think that Laeger's will take the longest to get. However, there are plenty of used Laeger's chassis around, so you could probably find some decent ones for a reasonable price. If you want to buy a killer 250R then you should look at mine. I just replace every bolt, bushing and bearing with all OEM honda parts. New brake caliper and master cylinder in back. Rebuilt front calipers. Full CT engine, ARENS chassis, steering stem and swingarm, Laeger a-arms, Lonestar axle, carrier and lock nut and the list goes on and on. I have $15000 invested, I am asking $10000. It has never been raced, and it has about 30 minutes on it. Anyway, I know a lot about 250R stuff, so I will answer any questions you have.
ROLL-complete frame, a-arms w/tie rods, steering stem, swingarm, linkage, AXIS shocks and mounting hardware for $7495
LAEGER-complete frame, a-arms w/tie rods and tie rod ends, steering stem, spindles, and swingarm for about $5000
LONESTAR-complete frame, a-arms w/tie rods, steering stem, swingarm, hubs, axle, carrier, locknut about $6000
ARENS-frame, steering stem and swingarm for about $2350-$2400
The only one that comes with hardware is the ROLL, otherwise you must use stock hardware for all other stuff. The ROLL chassis must use 400ex spindles and calipers in front. The ARENS swingarm does come with all the pivot hardware though, so all you need is the long bolt to mount it. Laeger's Pro Trax front ends come with mounting bolts and tie rod ends(actually heim joints). The Laeger's Pro Trax has custom spindles but you can use stock 88 or 89 hubs. The Laeger Pro Trax CR500 swingarm needs a CR500 linkage from a dirtbike and that is about $500 brand new. You can get Laeger frames for stock linkage as well. All of these have removable subframes and all are very well made. I think that Laeger's will take the longest to get. However, there are plenty of used Laeger's chassis around, so you could probably find some decent ones for a reasonable price. If you want to buy a killer 250R then you should look at mine. I just replace every bolt, bushing and bearing with all OEM honda parts. New brake caliper and master cylinder in back. Rebuilt front calipers. Full CT engine, ARENS chassis, steering stem and swingarm, Laeger a-arms, Lonestar axle, carrier and lock nut and the list goes on and on. I have $15000 invested, I am asking $10000. It has never been raced, and it has about 30 minutes on it. Anyway, I know a lot about 250R stuff, so I will answer any questions you have.
#17
#18
Thread
Thread Starter
Forum
Replies
Last Post
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
07-22-2015 05:00 AM
CRamshaw777
Classifieds, Garage Sale & Swap Shop
0
07-18-2015 05:46 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)