ATVConnection.com ATV Enthusiast Community

ATVConnection.com ATV Enthusiast Community (https://atvconnection.com/forums/)
-   Honda (https://atvconnection.com/forums/honda/)
-   -   400ex HP (https://atvconnection.com/forums/honda/21254-400ex-hp.html)

jab11 10-17-2000 09:49 PM

How much horsepower does the 400ex have at the crank and at the real wheels?And whats the difference?Thanks
Jeff

hondatrx300ex 10-17-2000 11:04 PM

28HP......not sure if thats rear wheel or what

Ga400exrider 10-17-2000 11:16 PM

Dont know the horsepower rating but I do know the difference. Horsepower at the crank is pure engine power. It is horsepower measured at the crankshaft. Horsepower at the rear wheels is a true measure of rideable horsepower. It is measured of course at the rear wheels on a chassis dyno which is just 1 or two big rollers in the ground. the diffence is that the horsepower at the wheels is horsepower from the crank after it has been lessened by different mechanisms such as the transmission, sprockets, and chain. These mechanisms especially the transmission are not 100% efficient. This is why the horsepower at the wheels is less. Hope this clears it up.

2000 400EX, FMF Powercore IV, Dynojet kit, 14 tooth front sprocket.

gordo37 10-17-2000 11:27 PM

THE 400EX HAS 25 HORSE POWER NOT SURE AT REAR WHEELS THOUGH.HOND SHOULD PRODUCE A QUAD WITH THE XR650 MOTOR AND CALL IT THE 650EX.
ERIC

gordo37 10-17-2000 11:28 PM

THE 400EX HAS 25 HORSE POWER NOT SURE AT REAR WHEELS THOUGH.HONDA SHOULD PRODUCE A QUAD WITH THE XR650 MOTOR AND CALL IT THE 650EX.
ERIC

jab11 10-17-2000 11:34 PM

Thanks guys i understand now.Anybody know the rear wheel horsepower?
Jeff

Motorhead 10-18-2000 04:23 AM

Ownership papers say 32hp, pretty sure that's at the crank, because most dyno charts I've seen show 25-27hp peak at the rear wheels.

bigboy400ex 10-18-2000 10:57 PM

MY 2001 400EX MAKES 27.3 HP AT THE REARHEEL WITH A YOSH FULLSYSTEM A K&N FILTER JETTED AND A XR250R REVBOX ........I INTEND ON PUTTING IN 440kit WITH CAM AND SOME HEADWORK...............PUSHIN FOR 40hp PLUS........

juicebottle 10-20-2000 10:06 PM

40 H.P. ? ppfffh,,, good luck!

jcv400ex 10-20-2000 11:43 PM

I paid the 50 bucks to have mine dynoed. I have 28.2 hp at the rear wheels. This is of course, with the chain, clutch and throttle adjusted properly. People don't understand how important this is. After I do all of my mods, the shop said they'd only charge me 10 bucks now. That's why i did it now so i can compare the differnce. I'm telling you guys, for a thousand bucks in mods to the 400ex in the motor, the Raptor doesn't look so good anymore. With the right mods, you can be at 42 hp for a thousand bucks. Ya gotta shop around.


All times are GMT -5. The time now is 08:32 PM.


© 2024 MH Sub I, LLC dba Internet Brands