won't fire
 

I have a 2002 trx 350 es that I was riding last week and all of the sudden, the bike quite and hasn't fired since.

I have changed spark plug, was able to borrow a cdi that was working and also tried a coil. Also tried the kill switch and all seems to be o.k

Looked for loose or broke wires and don't see a thing that is out of place. Will roll over not a problem but no spark

Any ideas would be appreciated

won't fire
 

yeah try replacing the coil and coil wire. sounds like you have done everything else you can O yeah and replace the cap also.

won't fire
 

THANKS, but as I said I have tried a coil, I just changes coil and wire from another 350. Both cdi and coil changed out from a working 350.

Still can't get it to spark

won't fire
 

bad stator coil or flywheel magnets. Also could be the ICM (ignition control module) or ECM

won't fire
 

i have been using the schematics from hondaservice.com , for reference and I don't see anything called icm or ecm the closest I see is part # 11 control unit.

The schematic are very good on this site, just looking for verification we are talking about the same module.

Not sure exactly what the icm or ecm looks like