recon 250 cut off when in gear
#1
#2
Can be all sorts of things. Is the carb set so it only runs when the idle revs are quite high, you can tell if you have the idle set high by the engine note. Could be centrifugal or one way clutch seized, Make sure the idle speed is set right then, if it is a foot change model, let your foot off slowly after changing into 1st, if the revs drop, and it stalls while trying to move forwards you have a centrifugal or one way clutch problem. If the bike cuts as soon as the neutral light goes out, you have an ignition problem.
Sorry, just noticed in the text you mention it is an ES, you could do the same test using the emergency lever.
Sorry, just noticed in the text you mention it is an ES, you could do the same test using the emergency lever.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)