Introduce Yourself Just Joined? Be sure to pop in here and introduce yourself & let us know what you ride. PLEASE DO NOT ASK QUESTIONS FOR HELP IN THIS AREA. Your better off asking in the Brand Discussions Area.

03 sportsman 90 engine noise

  #1  
Old 08-13-2017, 12:29 AM
Canadian27's Avatar
Weekend Warrior
Thread Starter
Join Date: Aug 2017
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default 03 sportsman 90 engine noise

Hello all new to the fourm. I have an 03 sportsman 90 that seems to run good but aeems to be loud near bottom of motor. Would clutch sound like bottom end is bad. Thanks
 
  #2  
Old 08-13-2017, 08:31 AM
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Join Date: Jun 2008
Location: North Texas
Posts: 24,352
Likes: 0
Received 33 Likes on 33 Posts
Default

Welcome to the forums. May be as simple as needing a new exhaust donut. Item#15.
 
Attached Thumbnails 03 sportsman 90 engine noise-75e775c11b26a2930490cca60381db4395f24140.png  
  #3  
Old 08-13-2017, 10:38 AM
Canadian27's Avatar
Weekend Warrior
Thread Starter
Join Date: Aug 2017
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

Thank you for your help. When i first got this atv an cleaned the carb i think the float wasnt quite right an flooded engine. Had some gas come out of exaust donut. Is this an indication that its bad? Is sounds like an engine running without oil. Has a complete top end rebuild. New reeds. New plug. I am new to 2 stroke but i have an 02 that runs allot more quite. Could the bottom end be bad? An how could i check? I am mechanically inclined and have my own shop n tools for most job just didnt want to tear it completely apart
 
  #4  
Old 08-13-2017, 10:41 AM
Canadian27's Avatar
Weekend Warrior
Thread Starter
Join Date: Aug 2017
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

Also it has to rev allot higher to engage the clutch than my 02. But my 02 needs a top end but still runs. Was wondering also if clutch would sound bad before actually not driveing the quad anymore.....again thanks for your help i truly appreciate it.
 
  #5  
Old 08-13-2017, 03:12 PM
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Join Date: Jun 2008
Location: North Texas
Posts: 24,352
Likes: 0
Received 33 Likes on 33 Posts
Default

If fuel getting into the exhaust seeped out of the donut you can at least assume it's bad. You may have other problems sounds like.The drive belt could be the problem or the clutches. You can understand a little more about engines and clutches along with the fuel system with a service manual.2003 Polaris Sportsman 90 Service Manual PDF Download
 
  #6  
Old 08-13-2017, 07:25 PM
Canadian27's Avatar
Weekend Warrior
Thread Starter
Join Date: Aug 2017
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

I think the noise on start up is the starter clutch catching or something but would that starter system make noise while quad is running? Also i was told not to run engine without the cover over the clutches. Is this true an will i cause damage if i do? I want to inspect whats going on during starring and running. Thanks
 
  #7  
Old 08-14-2017, 07:40 AM
scootergptx's Avatar
Supersock
Hired Gun!
"Badges? We don't need no stinkin' badges!"
Join Date: Apr 2003
Location: Land of the misfit toys
Posts: 136,206
Received 164 Likes on 163 Posts
Default

Welcome to the forums.
 
  #8  
Old 08-14-2017, 09:06 AM
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
Join Date: Jun 2008
Location: North Texas
Posts: 24,352
Likes: 0
Received 33 Likes on 33 Posts
Default

Originally Posted by Canadian27
I think the noise on start up is the starter clutch catching or something but would that starter system make noise while quad is running? Also i was told not to run engine without the cover over the clutches. Is this true an will i cause damage if i do? I want to inspect whats going on during starring and running. Thanks
That's where the manual can help. It goes into detail on the starter clutch,idle gear,etc.
 
  #9  
Old 08-14-2017, 06:34 PM
Canadian27's Avatar
Weekend Warrior
Thread Starter
Join Date: Aug 2017
Posts: 5
Likes: 0
Received 0 Likes on 0 Posts
Default

Thank you. I will try to figure out how to download the manual. I am a bit computer challenged.
 

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:31 PM.