Kawasaki Discussions about Kawasaki ATVs.

2 stroke KX250 eating oil and blowing it out its rear!

Thread Tools
 
Search this Thread
 
  #11  
Old 10-17-2003, 02:00 AM
MAKANIK's Avatar
Weekend Warrior
Join Date: Oct 2003
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default 2 stroke KX250 eating oil and blowing it out its rear!

Originally posted by: cammoman
I would change your mixture to 32:1 that will help with the smoking and improve the performance. At 42:1 your running too rich..

32:1 = 4.00 ounces of oil per gallon
42:1 = 3.04 ounces of oil per gallon

stick with the 42:1 mixture, After you split the cases and install the left side seal.
If you are loosing an excessive amount of crankcase oil, other than what would be leaking out of the clutch cover gasket that you mentioned......then you better be breaking out the big hammer and shop manual!


 
  #12  
Old 10-17-2003, 06:47 PM
VirginRider's Avatar
Range Rover
Thread Starter
Join Date: Sep 2002
Posts: 141
Likes: 0
Received 0 Likes on 0 Posts
Default 2 stroke KX250 eating oil and blowing it out its rear!

Im running 50 to 1 now and the bike screams, have not fouled one plug after 10 hours use. I am using motul 800.
 
  #13  
Old 10-18-2003, 12:50 PM
KDXRyder200's Avatar
Trailblazer
Join Date: Sep 2003
Posts: 46
Likes: 0
Received 0 Likes on 0 Posts
Default 2 stroke KX250 eating oil and blowing it out its rear!

I would be careful mixing your oil at 50:1 it is okay if you are running int he woods in low speed low-rpm conditions but deadly at top speed high-rpm conditions. I have a 1992 KX250 and i was riding with a friend going down a trail/road and i had it wound out at full throttle top gear going as fast as i could and as soon as i let off the gas the motor locked up[img]i/expressions/face-icon-small-sad.gif[/img].......i ended up frying the crank bearing where the conneting rod connects to the crank shaft.....not a good scene.....cost $500 for main bearings, seals, new crankpin, new crankbearings, new connecting rod,piston,and rings......my dad was flamming pissed..... don't make the mistake i made.....mix ur oil and gas at what the manual recommends which i know is 32:1 it is good insurance against costly repairs! P.S. you shouldn't foul any pluggs
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tomtom86
General Chat
1
08-07-2024 07:40 PM
mbkirk
Kids Quads
0
08-14-2015 08:20 PM
mbkirk
Technical and How-To Articles
0
08-14-2015 08:12 PM
Bell21
Kids Quads & Other ATV's - Ask an Expert!
1
07-28-2015 06:52 AM
ATVC Correspondent
Ask the Editor
12
07-21-2015 06:57 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: 2 stroke KX250 eating oil and blowing it out its rear!



All times are GMT -5. The time now is 11:45 AM.