I've had enough. It's going to the Dyno!
 

What's the purpose of shimming the needles? Is there no more grooves left in the needles to put the circlip?

I've had enough. It's going to the Dyno!
 

there is no circlips on most kehin needles.

I've had enough. It's going to the Dyno!
 

EasterEgg.... I'd be interested in seeing how you did the reserve tank myself!
Thanks!![img]i/expressions/face-icon-small-happy.gif[/img]

I've had enough. It's going to the Dyno!
 

This may sound like a dumb question.... but where do you guys get the shims, jets, etc for the Prairie? Anyone have a parts list??

Thanks!!

I've had enough. It's going to the Dyno!
 

here
find out what carb you have and this is a list

I've had enough. It's going to the Dyno!
 

thanks easteregg


check your pm's

I've had enough. It's going to the Dyno!
 

OK [img]i/expressions/face-icon-small-happy.gif[/img]

Thanks to all for helping!

It runs great now. I don't know what I did[img]i/expressions/face-icon-small-confused.gif[/img] must have been some dirt or an air leak. I took it all apart removed the bowls and slides, cleaned everything with carb cleaner, put it all back together, started and ran great none of the problems as before.

Once back together I made a 58 mph run down the street before needing to shut it down and it was still pulling.

Now all I need is the ups man to show up.

I've had enough. It's going to the Dyno!
 

Easteregg,I'm also interested in the reserve tank setup you did.I have an 04 prairie 700.Please E-mail any info you have.Thanks.