kfx 400 jetting???
#1
#2
#3
kfx 400 jetting???
What needle do you have in there?? If you have the stock, I HIGHLY recommend getting the DynoJet needle or the Alba needle. I say you are lean on the mid range which is why you have such a big main. Try this, move the clip on the needle one spot lower than where it already is...meaning closer to the tapered end. See what that does and lemme know!
#4
#5
kfx 400 jetting???
I moved the needle down 1 position, installed a 162.5 jet and it seems to run fine, plug is tan....probaly did'nt run it long enough with the 180 in. By the way how long do you have to ride to get a good reading?? On my banshee I warm her up, put new plugs in and haul *** for a 1&1/2 miles and shut it down. I did that with my kfx (180 jet) and plug was still white. After I moved the needle I rode it around for 30min and checked the plug and it is tan. Should I put a new plug in a do a WOT test??
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)