Kawasaki Discussions about Kawasaki ATVs.

Getting KFX700 Dyno'd

Thread Tools
 
Search this Thread
 
Old Apr 14, 2006 | 05:08 PM
  #1  
ArcheryMachine's Avatar
Thread Starter
|
Trailblazer
Joined: Mar 2003
Posts: 40
Likes: 0
Default Getting KFX700 Dyno'd

I just put a Muzzy exhaust on my KFX700 and now I'm dropping it of for our local performance shop to fine tune the jetting on the Dyno. Before they do the Dyno there going to install the Twin Air Power Kit (will tune with the lid off) and a rev box.

They did do a Dyno run with the lid on and the new pipe and they said the jetting looked lean (157.5, 155). Top speed was 63mph.

Looking forward to the results.....Probably next week sometime
 
Reply
Old Apr 14, 2006 | 11:05 PM
  #2  
DS650powe's Avatar
Pro Rider
Runs a 730 kit from OMW with web109's and a 48mm lectron. It has some serious torque!
Joined: Jan 2006
Posts: 683
Likes: 0
Default Getting KFX700 Dyno'd

how only 63mph? i woulda thought a 700 would be faster than 63
 
Reply
Old Apr 15, 2006 | 06:24 AM
  #3  
justgo's Avatar
Range Rover
Joined: Feb 2005
Posts: 178
Likes: 0
Default Getting KFX700 Dyno'd

Hmmm,,,63..looks like u need to bring them jets size up to 185,,open that air box up,,,and take out that primary spring,,and put in a ,,comet black,,,or ,,one that u like,,Hope u like your Muzzy,,,i like mine,,,good luck,,
 
Reply
Old Apr 15, 2006 | 11:38 AM
  #4  
ArcheryMachine's Avatar
Thread Starter
|
Trailblazer
Joined: Mar 2003
Posts: 40
Likes: 0
Default Getting KFX700 Dyno'd

Current airbox set up had 3 EPI vent holes and DG Snorkel. They did say I was running lean, but we stopped the testing to order a better filter since I was going to run with the lid off. They didn't like how the stock filter was seating at the base and it was separating at the top. Ordered the twin air kit and also a rev box. The spring that is in there is the pink spring.

Looking forward to the results.
 
Reply
Old Apr 16, 2006 | 05:17 PM
  #5  
torkmonsta's Avatar
Trailblazer
Joined: Dec 2005
Posts: 64
Likes: 0
Default Getting KFX700 Dyno'd

Thats too slow...almost funny.
 
Reply
Old Apr 17, 2006 | 03:41 AM
  #6  
RPM's Avatar
RPM
Pro Rider
Joined: Dec 2002
Posts: 1,075
Likes: 0
Default Getting KFX700 Dyno'd

We need to talk. [img]i/expressions/face-icon-small-smile.gif[/img]

I have been looking for a place to get my V on a dyno, to see if I can tune any more power into it and try some exhaust stuff on it. I think I have your number from the e-mail you sent me (If that was you?). I might call you next week some time (If that is OK?) and get the info for the place that you are getting dyno work done at.

I'm shooting you a PM.
 
Reply
Old Apr 18, 2006 | 01:40 AM
  #7  
ArcheryMachine's Avatar
Thread Starter
|
Trailblazer
Joined: Mar 2003
Posts: 40
Likes: 0
Default Getting KFX700 Dyno'd

RPM......I was the one who emailed you about your swing arm. Feel free to give me a call about the Dyno....I don't know where you are located in WA or what your schedule is, but I can let you know what day they are going to do the Dyno and you can come check them out. The shop is located in Puyallup on River RD.

I would also like to here what you have done to your engine/carbs. Always looking to go faster

Cell: 253.312.5546
email: arrowbucket@comcast.net
 
Reply
Old Apr 18, 2006 | 02:18 AM
  #8  
RPM's Avatar
RPM
Pro Rider
Joined: Dec 2002
Posts: 1,075
Likes: 0
Default Getting KFX700 Dyno'd

Is it S&S Motorsports?

I will call you about it.
 
Reply
Old Apr 18, 2006 | 02:13 PM
  #9  
ArcheryMachine's Avatar
Thread Starter
|
Trailblazer
Joined: Mar 2003
Posts: 40
Likes: 0
Default Getting KFX700 Dyno'd

Yes it is...
 
Reply
Old Apr 27, 2006 | 11:39 AM
  #10  
iROCKpeasONmyhead's Avatar
Weekend Warrior
Joined: Sep 2005
Posts: 25
Likes: 0
Default Getting KFX700 Dyno'd

63, no way.

I have my time sheets from a local racetrack, with laser timing saying that my speed was 69 in the 1/8th mile. STOCK.

 
Reply



All times are GMT -5. The time now is 10:52 PM.