Holeshot ATR's/C-series on P650
 

The new guy on the block, I've been reading
your posts for quite some time, thanks for the info guys.
Well, I just purchased the new ITP Holeshot ATR's and C-Series wheels.
They hook up like theres no tomarrow. But I've tried and tried
to get them to seat on the bead properly, every time I put the tire on the rim
it pops on the bead but I take it out for a ride and
it shakes like crazy. I either thought they are out of round, out of balance,
or I wasn't seating them properly on the rim.
Took the tires off the C-Series and put them on the stock rims and didn't shake any more.
You guys got any ideas, I'm going crazy?
[img]i/expressions/face-icon-small-disgusted.gif[/img]






Prarie 650

Holeshot ATR's/C-series on P650
 

You may have got a bad set of rims. IF they are not seated all the way that would be your problem. But it is possible to get a bad set of rims. If the problem is the bead not seating are you using dish soap on the beads to let the bead set easier? Im not sure on the ATR;s but my All tracs went on very hard and i had to take them to ful reccommended seating pressure to get them to seat. It was a harry situation.