Kids Quads Discussions about Kid's Quads and other ATV's.

Hi Bird

Thread Tools
 
Search this Thread
 
  #61  
Old 08-31-2007, 05:30 PM
Guest
Guest
Posts: n/a
Default Hi Bird

hello masternam if you really like 200cc HI-BIRD go with the double swing arm it much better than single arm .
 
  #62  
Old 08-31-2007, 06:33 PM
billl2099's Avatar
Pro Rider
Join Date: Aug 2005
Posts: 903
Likes: 0
Received 0 Likes on 0 Posts
Default Hi Bird

if my vote counts, go with the double a arms
 
  #63  
Old 08-31-2007, 07:14 PM
SilveradoSS's Avatar
Range Rover
Join Date: Mar 2007
Posts: 183
Likes: 0
Received 0 Likes on 0 Posts
Default Hi Bird

What bill2099 and vbike said! With the single a-arm, the tire and wheel will change camber when the suspension is compressed. With the double a-arm, the tire and wheel will stay perpendicular to the ground no matter what the suspension is doing.
 
  #64  
Old 09-11-2007, 04:48 PM
BigDaddyLeather's Avatar
Weekend Warrior
Join Date: Jun 2007
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default Hi Bird

OK, I have about ten hours on my 200 now and since making the brace for the chain tensioner I've had little problems. Never got the front brake switch unstuck so I just unplugged it. Back brake switch works just fine. I'm looking into other dealers for another ATV. Funny what you might find on the BBB web site. Some dealers have no rating and I'm guessing it's because they are doing a good job. I am leaning towards LG Wholesale.

Ride Free,
Doug
 
  #65  
Old 10-20-2007, 04:30 PM
New quad head's Avatar
Weekend Warrior
Join Date: Jul 2007
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default Hi Bird

Just something I learned today on the 150 automatics. The loud knocking noise that sounds like the engine or tranniy is going to self-destruct is just the front sprocket shaft bearing in the bracket on the right side of the engine. The bracket doesn't keep the bearing aligned very well and wears it out quickly. It's loud because it rings through the bracket. I greased it and that helped but it will need replacing eventually. Doesn't look very hard to replace. Now I know its nothing major and we can keep riding the heck out of it.

Pete
 
  #66  
Old 12-01-2007, 11:47 AM
New quad head's Avatar
Weekend Warrior
Join Date: Jul 2007
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default Hi Bird

I was wondering which dealer is the best dealer to buy parts from for the Hi-birds. I bought it from Anamcycles. I called and left a message. Haven't heard from them yet. We got some bent tie rod ends.

thanks,

Pete
Hi bird 150 automatic
 
  #67  
Old 12-01-2007, 12:22 PM
sbaker72's Avatar
Weekend Warrior
Join Date: Nov 2007
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default Hi Bird

Bought the kids a tierra,hensim, whatever, about a year ago, havent been able to get it to idle on its own ever, so now they ride the yamaha. Never again will I buy a chinese bike.
 
  #68  
Old 12-01-2007, 03:01 PM
billl2099's Avatar
Pro Rider
Join Date: Aug 2005
Posts: 903
Likes: 0
Received 0 Likes on 0 Posts
Default Hi Bird

<div class="FTQUOTE"><begin quote>Originally posted by: sbaker72

Bought the kids a tierra,hensim, whatever, about a year ago, havent been able to get it to idle on its own ever, so now they ride the yamaha. Never again will I buy a chinese bike.</end quote></div>

i hear ya,
 
  #69  
Old 02-10-2008, 02:38 PM
bwilcox's Avatar
Weekend Warrior
Join Date: Feb 2008
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default Hi Bird

I bouth two Hurricane 250s from motorxtremes. I got them home, assembled them finally got them started with starter fluid. They seem to start and idle fine but they don't have much power. There is not much torque at all through first and third gear and fourth gear is horrible. Do you have any suggestions?
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
EIF
Chinese Quads
1
04-20-2017 07:15 PM
CrowleyOffroad
Land, Trail and Environmental Issues
2
02-26-2004 09:34 PM

Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 


Quick Reply: Hi Bird



All times are GMT -5. The time now is 02:47 PM.