50cc China made ATV won't fire HELP
 

I have changed spark plugs and tried to replace the CDI unit but that is where the real problems started. When I took the plastic plug off the CDI unit some of the wires came out of the plug that connected to the CDI unit. I have no idea where those wires go back in at.

Is there any one that could tell the placement of the wires. There are five prongs on the CDI unit and places in the plug.
I have a Yellow/Black wire that goes to the coil.
a Red/Black wire that goes to the Mag.
a Blue/white wire that goes to the Mag.
A Green wire that I think is the ground wire.
and a Blue wire that I have no idea where it goes.

My husband bought this ATV from a individual that assured him all it needed to run was a new spark plug and a battery. Well that was not the case and out 6 year old son has been waiting to ride this for some time now. It did start two times only to die a few minutes later. We have not been able to get fire to the plug since then.

If anyone has a wire diagram that would be alot of help.

Can any one help,

Thanks,

50cc China made ATV won't fire HELP
 

Not sure if this will help but you should type in "wiring" in the search field and it will pull up ALOT of Toipcs with diagrams but here is one I saw that may help.
http://forums.atvconnection.co...word1=wiring%20diagram