Two Brand New ATA 250-D ATVs Won't Start
#11
Two Brand New ATA 250-D ATVs Won't Start
Seems that the GY6 auto chokes have issues. You may be having the reverse problem as noted on this site.
http://www.rc-trucks.org/gy6-engine-performance.htm
Take a look at.
4) Eliminate automatic choke
Lots of other good ideas there too...
http://www.rc-trucks.org/gy6-engine-performance.htm
Take a look at.
4) Eliminate automatic choke
Lots of other good ideas there too...
#12
#13
I just bought a TaoTao Rhino 250 (11/03/2015). After putting gas in it and setting the kill switch to the run position, It started- ONCE !!!- It wont start now. Fuel switch is in the on position, in neutral, brakes depressed, key on, clutch level squeezed, throttle engaged. It turns over fine just- NO GO. I will never buy another one of these pieces of Chinese junk. What should I do?
#14
Take the plug out, re-fit the lead, lay it on the head and spin the engine over to see if it sparks. Try a new plug if it doesn't. If you still have no spark check all wiring connectors for a loose wire. If it is sparking, check compression, if that is good, clean the carb out, some debris from assembly may have got in there.
#16
I had trouble finding parts for my son’s Chinese ATV and stumbled upon this web site. Has an easy to use parts lookup and you can call them for free tech help. I would recommend them to anyone.
Chinese ATV parts, Chinese Dirtbike Parts, Chinese ATV parts usa, chinese atv parts canada
Chinese ATV parts, Chinese Dirtbike Parts, Chinese ATV parts usa, chinese atv parts canada
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)