90cc monsoon wiring help no spark
#1
90cc monsoon wiring help no spark
i have a 90cc moonsoon atv (yerfdog) and we bought it for $20 and we got it running good but yesterday i messing with the stock kill switch and ingnition buttons and hand plug and unpluged some wires and plug them all were they were (atleast i think i did lol) but it sounded like the spark plug fould all the sudden so we ran up and got a new but still no go so we cleaned the carb and also nothing but i think its not get a spark and is an electrical any help would be great
#3
#4
If it has spark, IMO there is no electrical problem with it starting.
I think I'd hold the throttle wide open and try to start it as you mention that it floods The crankcase gets too much fuel (usually a carb problem) so you need the full throttle to allow the air in that it'll need to start and clean out..
let's try that.
I think I'd hold the throttle wide open and try to start it as you mention that it floods The crankcase gets too much fuel (usually a carb problem) so you need the full throttle to allow the air in that it'll need to start and clean out..
let's try that.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)