ATV Enthusiast Community - View Profile: LynnEdwards

LynnEdwards LynnEdwards is offline

Electrical Expert
Likes High Voltage In The Tub!

About Me

  • About LynnEdwards
    I'm a 60 year old male who bought a quad for the first time just six years ago.
    Tracy, California, USA
    ATV Riding, Machining/Metalworking
    Electronics Engineer


Total Posts
Visitor Messages
Total Likes
General Information
  • Last Activity: 07-08-2015 10:54 PM
  • Join Date: 12-05-2008
  • Referrals: 3


Showing Friends 1 to 15 of 16

Visitor Messages

Showing Visitor Messages 1 to 10 of 136
  1. 08-10-2018 11:20 AM - permalink
    i read a post you had dealing with the chinese quads
    maybe you can help me
    I bought 2 quads one ran right out of the box
    the other wouldnt start it would crank but not fire up
    found it had no-spark thru a series of efforts the problem appears to be the CDI box wich is a 5-pin with the green plug
    here is what I have
    if i take the cdi box out of the running quad and put on the other it fires right up. so i went and got a new 5-pin cdi box installed and it will not start the atv
    thought it was bad had it swapped twice now still wont start the quads
    i can make them run with the one original cdi box but not with any replacements
    what am i missing here
  2. 05-01-2016 06:15 AM - permalink
    Hi, new member, first post. after months of aggravation we finally got this atv put together and working pretty good last year. It's a chinese 110/ 125D I just put a new battery in, grandson had been riding issue free for 4 or 5 days. While out riding, he stopped for a moment, turned off, when went to start, nothing. No signs of power at all. Checked, battery, 12.8v, fuse, etc. I am an electrical contractor so I'm not a stranger to looking for issues,except for bikes and cars, dont have the touch for troubleshooting these, any help would be greatly appreciated. Thanks! RBP1
  3. httysctty
    03-08-2016 06:15 PM - permalink
    You seem to know all about Chinese ATV wiring and any help would be appreciated. I have a Tao Tao 250D. Bought new wiring harness, CDI, Coil, regulator, starter soleniod start stop switch and battery. The starter work (bench tested) and the motor turns over (not locked).
    There is no spark when pressing the button and no noise what so ever. All brakes are pressed, all connections are clean. I am lost. Coud the starter switch be bad? There is a brown wire coming from the start stop switch that is connected to nothing on the new wire harness. Could this be it? I am lost and an help would be greatly appreciated.
  4. 02-09-2016 10:06 AM - permalink
    HI! I have a Kazuma Jaguar 500 with no spark!! I saw your form back in 2012 helping someone but I have tried all of that and still haven't got my bike to start. Tested the ignition coil with a multimeter and it is reading that there is no power getting to the ignition coil. And also, the stator is reading 20.1 omhs. This is a perfect reading according to the Trail Tech. But the bike has been out of comission for a week now and I need help as soon as possible THANSK
  5. 12-09-2015 06:48 PM - permalink
    good evening lynn. ive camw across your name numerous times and wondering if you can help me out. i am desperaterly looking for an aftermarket cdi fro a kfx50. please sir HELP ME.
  6. 09-28-2015 08:51 PM - permalink
    Would you be able to send me the manual for the 110? Thank you very much! [email protected]
  7. 06-13-2015 03:46 PM - permalink
    Hi lynn wondering if could get copy of the 110 manuals thanks [email protected] is email
  8. 11-18-2014 03:14 PM - permalink
    Hi lynnedwards, we just bought our daughters two 2011 taotao ata110b quads for this Christmas and they won't start. Could we get a manual sent to us also please? You are the only one I could find out there with any knowledge about it. Thank you!
  9. 10-02-2014 08:08 AM - permalink
    I was wondering if someone could PLEASE help me..I have a SUNL Transformer V-4 ( i can hear everyone cringe) It was running when I bought it, it was ridden once, and it never ran again..No spark...cranks and coil, cdi, plug, stator, gas, you name it.. power to everything to and from, just no spark..the thing looks like it was wired by a 3 year old..I would love to tear everything out and start fresh but that's probably not smart. My son is dying to ride this, I bought it a year ago for my sons birthday and it's been sitting..his birthday is this month and I really want to get it going..PLEASE any help would be so appreciated.. my email is [email protected]...
  10. 09-06-2014 07:12 PM - permalink
    hi i have problem with me taotao 110cc it have no stark can you send me repair manual

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.