ATVConnection.com ATV Enthusiast Community - View Profile: mywifesquad



mywifesquad mywifesquad is online now

KTM Patrol
Former Chinese POW!

Visitor Messages

Showing Visitor Messages 1 to 10 of 21
  1. turbowrenchhead
    09-20-2013 11:08 AM - permalink
    turbowrenchhead
    I looks like your the guy to talk to. I had a customer bring in a 2009 Jet Moto 125. There is no crank and no spark when manually jumped. I need a manual or a complete schematic. Can you help me? Write me at [email protected] if you have any info, thanks.
  2. cherokeangel
    08-11-2013 12:15 PM - permalink
    cherokeangel
    I could REALLY use some help. My husband and I bought (2) matching quads a few months ago. Not knowing much about them, we were told they were Kazumas. We've actually discovered they are Yamoto 150cc's. We are in need of a repair manual, or part information for the front and rear sprockets, as well as the chain. What comes on them from the "factory"? Both quads we bought have different parts (sigh), so we are trying to determine which is "correct". Thanks for any and all help!
  3. Dragginbutt
    12-22-2012 10:28 AM - permalink
    Dragginbutt
    Hey dude, how are things? Last time we spoke has been a while. Me, just busy at work. Managed to pick up a slightly used toyhauler. (Raptor) PLanning some trips to Hatfield McCoy next summer. Had bypass surgery about a year ago, still healing from that, but am excited to get out and about again. Everything is good.
  4. KrazyKevin40
    06-06-2012 07:12 PM - permalink
    KrazyKevin40
    mywifesquad, i have a problem i also have a panther 110 4 wheeler and the carb was bogging down when you open up the carb. i took off the carb and checked everything and it was clean but when i went to put the throttle cable back on the carb and cranked up the 4 wheeler the engine reves up really high even though the choke is closed. I think the throttle cable is messed up it is the original cable do you think I to get a new one???
  5. LT80
    01-11-2012 11:07 AM - permalink
    LT80
    Are you getting hit by "black hole toolkit website 12"???
  6. Maddog5353
    11-03-2011 07:58 PM - permalink
    Maddog5353
    I just got a Yamoto Redcat 70cc shaft drive full auto that has reverse but will not engage and the guy said that when you go up a hill it loses power, also I dont know how to put it in reverse any help would be great
  7. TaoTao135cc
    07-22-2011 08:52 PM - permalink
    TaoTao135cc
    Have 135cc semi-auot 3 speed honda clone motor and the timing is off quite a bit..well I know how to remove the large metal circle to reveal the timing gear and chain BUT i need to take the chain off so I can adjust the gear and put the chain back on...My problem is the chain feels awfully tight and Iam sure I took out the tensior bolt..So I need to get to were the timing chain is in the bottom of the motor.... How do I get to it? It looks like if I take the clutch cover off it wouldnt get me to it and I had the stator cover off so I know its not there..Do I need to take the head off to get to it? Or is it behind the clutch cover? Is there even a manual for these?
  8. jbjwolf
    07-06-2011 05:45 PM - permalink
    jbjwolf
    Hi, we just bought a 2006 Jetmoto Utility ATV and the son had taken apart the carbarator and my husband has put it back together but we think there is something missing because the gas is running out the bottom. Do you have a diagram of the carborator or a similar one that could help him?
  9. fenceman74
    12-03-2010 10:48 PM - permalink
    fenceman74
    hi i am new to the chinese quads an you seem to be well educated in them. I have a tao tao 150D and i changed the oil. When i did i found a spring and a screen in the pan after all the oil was changed . Does that go back in a certain way? and how much oil will it take ? thanks for all the help wayne
  10. iiii
    08-20-2010 03:09 AM - permalink
    iiii
    Hi,

    I was wondering about a part for my ATV(Roketa ATV-64). It is a 250cc utility quad. The rear part of the drive shaft broke and I need a new u joint and yoke(think that's what it's called). I was wondering if I could use this part from a Honda Recon 250. Can you give any idea what I would have to do if the part isn't compatible, or maybe I could get a compatable part from somewhere else. Please help.

    Thank You

About Me

  • About mywifesquad
    Location
    Newman, Ca
    Interests
    Dirt Bikes and ATV's..
    Occupation
    Machine Shop Owner
    forename
    Joel
    surname
    Shinnick
  • Signature
    '08 Honda CRF 50
    '07 Jetmoto 250
    '07 90cc Mini Utility
    '06 Jetmoto 200 Enduro (traded for G4)
    '06 Jetmoto 200
    '06 Jetmoto 150 (traded for KD)
    '06 Jetmoto 125
    '04 Yamoto 150
    '01 KTM 400 EXC
    '92 Yamaha WR 250
    '91 Honda CR 250
    '88 Yamaha YZ 80
    '85 Honda CR 500
    '83 Honda XL 600
    '82 Honda XR 200
    '79 Honda XR 75
    '78 Kawasaki KD 125
    '75 Kawasaki G4 100
    '74 Heald VT-8 Super Bronc's (2)
    '73 Bultaco 360 Pursang
    '70 Rupp Enduro
    '70 HPE Muskin Cat 400 X
    '69 Honda MiniTrail 50

Statistics

Total Posts
Albums
Visitor Messages
General Information
  • Last Activity: Yesterday 11:24 PM
  • Join Date: 07-26-2004
  • Referrals: 0

Friends

Showing Friends 1 to 15 of 15

Social Profiles

Instant Messaging
Send an Instant Message to mywifesquad Using...
  • Google Plus Yes
This Page
https://atvconnection.com/forums/members/mywifesquad-48986.html

All times are GMT -5. The time now is 12:16 AM.