OK People, I want better low end performance... I am not looking to go faster in my top end, I am looking for hill climbing grunt. I also do not want a LOUD exhaust... I am game for re gearing,I like the clearance I have so I do not want to lower my bike with smaller tires. pipe and carb work is ok, or even going into the top end of the bike. I do not want to go into the bottom end of the bike and I am looking for reliable mods...my bike is a bone stock 2000 Honda 300ex. please give all opinions people... don't just let one guy do the talking. I also am not Ritchie rich so $2500 dollars of mods is never going to happen... I would like to spend $300.00 to $1000.00 tops

OH ,and dont forget to tell me all the cool tricks i can do with little or no $ involved. and does any one know of a oil cooler for this bike...thanks people

what is you front sprocket?

the std 13 tooth should be ok

get it ported and polished, large head pipe
...larger mainjet
uni filter or some thing, high compression piston

tricks
falling of is my favourite one!

riding on any two wheels...can be done on any bike

oilcooler

dirt wheels did a test in august98 on one

kit value was $180 est

that price was a couple of years ago
sold by dirt mod (dunno if they still exist)

email: dirtmods98@aol.com

ride hard

pudding

You could get an FMF Megamax and run 10 discs. This pipe isn't very loud. Then get a WEBCAM bolt in cam(you won't need stiffer valve springs). Then, a higher compression piston(this will give you the biggest bottom end gain).

FMF Megamax...about $240
Webcam....$90 + $120 for hardwelded rocker arms
Wiseco piston...$90? or for Arias about $130

With these mods, you would gain quite a bit of midrange, and a little bottom end as well.