Hey Stendori (front spacer post)
Hey, I'm wondering how the spacers affected the ride and was there any clearance gained?
I have an 06 SP 800 that I'm doing tons of work to and when I read your post last year or so i wanted to do it. my front wheels look as if they lean in from bottom to top. from the front / \ Now i have or am changing the tie-rod ends, wheel bearings, ball joints and ordering 2 new black rubber bushings that go up in the springs. But, my way is not with PVC it is actually whats left of the wheel bearings from the rear wheels i believe. Anyway the outside of the bearing is almost perfectly fit to do the same task. Ill let you know on that. Thanks |
as far as the ride goes, it makes the front end sit up higher, but to me not enough that it effected the handling(maybe a slight stiffer ride in front)on either of the bikes I did( 4 of them I think). there was no rubbing issues at all. I used pvc as it would not have any metal on metal earing from just riding vibrations on rough terrain. Plus it was an inexpensive and quick fix to the sag.;)
|
All times are GMT -5. The time now is 02:37 AM. |
© 2024 MH Sub I, LLC dba Internet Brands