Polaris 09 500 no power
#1
Polaris 09 500 no power
Quit while riding,have power to fuses and out but no power at ignition switch. checked etc switch and kill switch both good .The schematics show power on the yellow wire from fuse to ignition switch as direct , is there anything else they hid in line before I open the wiring harness to check the yellow line. Any help would be appreciated.
#2
You disconnect the black cdi kill wire and see if it helps.. If it doesn't,the most problems we had were the fuse blocks themselves. These delphi type blocks were bad on the terminals shorting.Per 080 029 036 4 ATO ATC Delphi Fuse Block Panel 4 Gang 12 V Blade Style Fuse | eBay
#5
#6
#7
Trending Topics
#8
Yep,you're right,was thinking about the breaker for the fan relay.. Looking at the schematic,if you jumpered the yellow from the fuse block to the switch and regained power,then does sound like you have a short in it somewhere. My two cents,I'd run a new permanent wire and just bypass it completely rather than digging through the harness to find a short in the yellow. It's what a lot of techs would do in a case like this anyway whether it was in an atv or an auto.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)