93 polaris 250 - ATVConnection.com ATV Enthusiast Community



Reply
 
Thread Tools Search this Thread
  #1  
Old 02-20-2017, 04:44 PM
Weekend Warrior
Thread Starter
 
Join Date: Feb 2017
Posts: 2
Default 93 polaris 250

My 250 has low comp about 40lbs won't run. Opened it up ,head and piston looked good. Replaced the piston and rings new gasket. Same problem. Sprayed motor with soapy water turned it over didn't see any leaks. Any ideas
Thank you
Reply With Quote
  #2  
Old 02-21-2017, 05:45 AM
old polaris tech's Avatar
Polaris ATV Expert
Retired and loving it!
 
Join Date: Jun 2008
Location: North Texas
Posts: 21,011
Default

Doesn't do any good just replacing a stock piston in a worn cylinder bore usually. Have the cylinder measured for the next over size needed as Wiseco,etc has pistons from stock all the way to 2mm over stock size.Then the cylinder has to be bored and honed to the piston. If you happened to have had a new over size piston installed and still no start,usually it's the crank seals that is if you have good spark,compression and good fuel supply.
Reply With Quote
  #3  
Old 02-22-2017, 07:37 PM
Weekend Warrior
Thread Starter
 
Join Date: Feb 2017
Posts: 2
Default

Good point. I'll check cylinder bore next.
Thank you
Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -5. The time now is 10:33 PM.


 
  • Ask a Question
    Get answers from community experts
What's your question?
Send