softening up shocks on my 2017 570 rzr
#2
There are adjustments on the shocks where the springs are. Usually, Polaris has a spanner wrench as part of the tool kit that comes with the ATV/UTV. The pre-load adjustment has a ring that has notches in it. The notches are made for the spanner wrench to fit its two teeth into. The more pre-load on the spring the stiffer the ride and higher the ride height. This is probably how your shocks look:
One thing you want to do when adjusting the pre-load is to jack up that end of your RZR when you adjust so it's easier. Sometimes a little WD-4- between the shock body, and notched sleeve helps too.
One thing you want to do when adjusting the pre-load is to jack up that end of your RZR when you adjust so it's easier. Sometimes a little WD-4- between the shock body, and notched sleeve helps too.
Thread
Thread Starter
Forum
Replies
Last Post
pogo ski
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
04-07-2018 08:40 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)