I'm running lean can I just.....
 

I did a pulg test a the pulg was a whiteish color. Could I just adjust the carb Or do I have to rejet.

I'm running lean can I just.....
 

It all depends on where you did the plug test.1/4,1/2 or full throttle.If it was wide open ,then yes you will have to rejet.If it was 1/2 throttle then you can adjust the needle.

I'm running lean can I just.....
 

I did it a 1/4 first and it was white so then I did one at full throttle and took out 3 disks from my pipe and it was brownish tan color so I guess its good now. thanks for the help CED.

I'm running lean can I just.....
 

have you checked your 1/4 throttle again?if its still white adjust your pilot screw to get it right..

I'm running lean can I just.....
 

Ya 1/4 looked good to thanks for asking thou.

I'm running lean can I just.....
 

where does the pilot jet effect the performance off idle or through half?

I'm running lean can I just.....
 

I was wondering that to?

I'm running lean can I just.....
 

the pilot affects idle to 1/4 throttle and the jet is 1/4 throttle to 3/4 throttle and the main jet is mostly WOT

I'm running lean can I just.....
 

1/2-3/4 can be adjusted by raising or lowering the clip on the needle..

I'm running lean can I just.....
 

Its very easy just unscrew the top of the carb and pull out the valve and remove the throttle cable and the throttle plate and pull the needle out and pull the clip of and raise or lower it but make sure you dont use it they are a pain to find!