Help with 500ho rear axle
#1
Help with 500ho rear axle
I ripped a inside rear boot on the 500ho and want to change it myself. I have the manual for it. I have the three bolts removed from the a-arms to the bearing carrier. The manual says to remove the bearing carrier but it won't budge. It looks like it should just come straight out. Is there a trick to it.
#4
#7
Help with 500ho rear axle
Take a small flat screw driver and pry out the rubber bushing and there will be a metal piece in there holding the bottom in place. Look here at #33 that is the rubber bushing you need to take out to get to #35 the bushing carrier that probably whats holding you.
Trending Topics
#10
Help with 500ho rear axle
Yea the bushings needed to come out. I was trying to get the drive shaft back into the inner cv joint and am having trouble holding the spring clip apart to get the shaft started back into the cv joint. I spent about a hour on it until 10:30 and quit for the night.