SP800 exhaust on SP700
#11
SP800 exhaust on SP700
[quote]
Originally posted by: madmatt1971
Thanks for the info. looks like $$$ well spent. Now I jsut need a programmer to update my fule maps since I have efi.[/q
Did not need to reprogram mine,put the snorkel,800 header and wht. bro's can on .Did add some heavier primary weights,but I was having a little slip @ new pipe install.Was probably haveing same problem before new exhaust,just was as noticable.
Sure made noticable diff in low to mid range w/o loss of top end.Oh yes it sounds good too.
Originally posted by: madmatt1971
Thanks for the info. looks like $$$ well spent. Now I jsut need a programmer to update my fule maps since I have efi.[/q
Did not need to reprogram mine,put the snorkel,800 header and wht. bro's can on .Did add some heavier primary weights,but I was having a little slip @ new pipe install.Was probably haveing same problem before new exhaust,just was as noticable.
Sure made noticable diff in low to mid range w/o loss of top end.Oh yes it sounds good too.
#13
#14
SP800 exhaust on SP700
Thanks for all the input! my wreck will take or" even out" a 800 with the 160 jet(much trial and error tuning) off the line but the 800 just out runs me at the top---5800rpm at about 58mph. The 800 header is for sure the way to go-- when I get one I will let ya know.
#15
SP800 exhaust on SP700
I have a complete 800 stock exhaust for sale. It includes the 800 header and the two cans plus hardware. You will have to purchase new heat shields (3) I used them on the new exhaust. I am about to put up on e-bay but wanted to give you 700 guys first dibs. I will sell the entire set-up as is for $200 plus $45 shipping (not that cheap to ship-sorry. E-mail me if you are interested and I will send you all the picks you want. brian.wisniewski@pfizer.com
Thread
Thread Starter
Forum
Replies
Last Post
mrtidy
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
02-03-2016 05:00 PM
Quadzilla Heritage
Classifieds, Garage Sale & Swap Shop
0
09-25-2015 01:39 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)