What's gone wrong with my 700 EFI???
 

Over the weekend I changed all the fluids in my quad. The first ride I took after doing this, I could not get over 40mph and about 5200RPM at which point it dies off a bit kinda like hitting the rev limiter. Could I have inadvertantly screwed something up during my fluid change or is this just a coincidence. My fuel gage always shows 3 bars as well indicating I may have an electrical issue of some sort but this existed before bogging condition I described. At any rate does anyone have any ideas as to what I could check in regards to the speed/RPM issue or the fuel gage issue for that matter? Thanks in advance.

What's gone wrong with my 700 EFI???
 

is the belt slipping?

What's gone wrong with my 700 EFI???
 

I am not sure. How would I check if it is slipping at that speed? I can see that affecting the speed but would it also limit the RPM's I am seeing?

What's gone wrong with my 700 EFI???
 

it wouldnt be the belt sliiping at those low rpms. i would doubt t6he fuel gauge has any thing to do w/ it as mine always shows 2 bars down when its full. make sure the filter inst plugged any any thing.did you replace the fuel filter as well?