28X9X14's on their 850XP?
 

Is anyone currently running these or a similar size? If so, I would love to see some pics. Thanks.

Not sure this will help much, there not 28", but it will give you an idea...

pics of my new tires and wheels

http://forums.atvconnection.com/pict...ictureid=35077http://forums.atvconnection.com/pict...ictureid=35076http://forums.atvconnection.com/pict...ictureid=35073 Not 28's but 27x9x14 front and 27x11x14 rear Mudlite XTR's.

That's looking real nice. From the prictures, I am a bit concerned about going to the 28". They may be real close on the rear for clearance.

I was intially looking at the Interco Swamplite in a 28x9x14 to go all around, but may have to look at the 27x9x14. There are so many tires out there with different applcations. It is difficult to decide.

Thanks again for the pics. Keep them coming.

I had to go with a 1" spacer to clear the 11" rear's on the stock wheel's. No problem up front with the 9's. These XTR's are 6 ply radial's and running 10 psi they ride and handle great.

This is my 850 with 28x9 and 28x11 zillas hope thes help it also has a RDC 2.5 lift in thes photos.
Attachment 20126
http://i693.photobucket.com/albums/v...3/CIMG2604.jpg
Attachment 20127

If I am correct, I should be fine running 27x9x14's all around. I was even thinking 8's all around, but I can't find a 27" or 28" in a 8".

I want to go with the pizza cutter look and ride.

Tiller73 I have to say that is one sweeeeeeeet ride. I love it.

Did you run those tires on it prior to the lift by chance?

Yes i did about 300 miles before lift and now 150 on lift and tires and love this setup the best. But the tire ride nice hook up well for trail riding and do well in the mud have no complaints about them yet, but they are light and just waiting tell the day i puncture one of them.

28's
 

is this the a arm lift or the spacer lift?:D