warning lights??
'95 xplorer 400 4x4,..how can i tell if warning lights working?? only one ive seen come on is the reverse light,...its got a high beam indicator but it don't work,...its got a oil light but didn't think a 2 stroke held oil??? an water temp light ant ever seen it flash or nothing want to get all this workin right an maybe put a water temp gauge on it too,..thanks for any help!!
|
Oil injector
Does that have the oil tank with the injector or do you have to maix your own gas before you put it in? I know the 300s have the injector that does the mixing for you! If this is the case, that may be your oil light!
Mudslinger2 |
yes its got the oil tank an all,..its full,..an seems to be working...it runs good,..got a few eletrical issues im workin on,..had to replace all the lights an i replaced the volt regulator,..hopin to get the starter right an make sure everything else is right like warning lights an cooling fan,...really would like a temp gauge!!
|
If all light bulbs were burnt out Ill bet someone ran it without a battery, that fries all the bulbs and probably the regulator too, battery act as a buffer, the oil light ect probably got fried too, take the [pod apart and look at all bulbs, renvrse , nuetral ect
|
Originally Posted by Kerbbirds
(Post 3011532)
If all light bulbs were burnt out Ill bet someone ran it without a battery, that fries all the bulbs and probably the regulator too, battery act as a buffer, the oil light ect probably got fried too, take the [pod apart and look at all bulbs, renvrse , nuetral ect
|
Two stroke - Radiator?
|
yes it should be a liquid 2 stroke 400 for that year. i agree w/ kerbbirds in maybe he did run it a little w/ bad or missing battery.
|
All times are GMT -5. The time now is 09:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands